Key Points
- Preheating Extracts
- Purge Lines
- Clean Tank
- Load Extracts
- Load Empty Cartridge Components
The Xylem X3 produced fully filled vaporizer with the press of a button – with parts handling filling and capping occurring within the machine.
Highlights
00:05
Place oil in a water bath overnight and set to desired temperature.
00:12
Before loading your material, purge the lines using the control panel to insure that there is no cross contamination.
00:25
Be sure to wipe down the lid and the inside of the tank prior to loading material.
00:47
Carefully pour the preheated extract into the tank and secure the lid and pressure valve.
01:18
Load the cartridges and mouthpieces into their designated hoppers.
The Xylem can be filled with multiple types of oil, ranging from Rosin to CBD e-juice. Depending on the material you are using, preheat the oil in a water bath overnight and set the appropriate temperature using the presets on the Xylem .
Never use a material that has not been properly degassed or had all crystals crashed out. The results could end with the Xylem being damaged.
The Xylem can fill both 1-gram and .5-gram cartridges with either Barrel or Duckbill mouthpieces depending on the configuration.
